Installation
 |
 |
 |
 |
 |
 |
 |
 |
Installation is a snap. The only tools you'll need are the following:
Note: If substitute tools are being used, or if you doubt your ability to do work with them, ask a mechanic or bodyshop professional for help.
Here is a summary of the installation process. For more detail click the link below
to see a full explanation with illustrations.
Complete Installation Instructions
There are 3 fasteners on the top and 3 on the bottom. You'll unscrew these and pull them out with your fingers.
Shove the new bolts through the holes in the grille and the teeth. Tighten 'em up.
Voila. You are done.
We're truly not kidding. This is all there is to it.
Each kit ships with a clearly-worded instruction sheet including detailed
illustrations.
By the way, if you haven't pulled your Miata's "baby teeth" yet, no problem. The installation does not interfere in any way.
Installation has been verified in the following Miata model years: 1990-1997,
1999-2001. Many customers report they have installed the teeth in newer models,
but we have not verified these installations personally. If you're bit of a
tinkerer, you'll be up to the challenge.
 | Phillips screwdriver | |
| 1/2" socket and ratchet wrench (can substitute 1/2" open ended wrench or a | |
| crescent wrench in a pinch) | ||
| Diagonal wire cutters (for some early models) |
Note: If substitute tools are being used, or if you doubt your ability to do work with them, ask a mechanic or body
Here is a summary of the installation process. For more detail click the link below
to see a full explanation with illustrations.
Complete Installation Instructions
 | Remove existing fasteners (6) from the grille. |
| Install the teeth. |
| Put away your tools. |
| Now take her for a spin, and see who notices first. |
We're truly not kidding. This is all there is to it.
Each kit ships with a clearly-worded instruction sheet including detailed
illustrations.
By the way, if you haven't pulled your Miata's "baby teeth" yet, no problem. The
Installation has been verified in the following Miata model years: 1990-1997,
1999-2001. Many customers report they have installed the teeth in newer models,
but we have not verified these installations personally. If you're bit of a
tinkerer, you'll be up to the challenge.